Bladex Series Hydraulic Shears

Bladex Series Hydraulic Shears

Features

Our Swing Beam BLADEX and Angle Rake RAKEX Shears are built by experience to reach optiumum cutting results. Defined by high quality standards, selected electronic, electrical, hydraulic and pneumatic components are chosen to ensure accuracy and reliability.

Built to last, trusted for decades

Rigid frame construction and stable assembly ensure a long service life for our Bladex Series—reliability you can trust for decades. Unbeatable value with key features as standard.

Strong & User-Friendly

Wide working range without blade gap adjustments, ensuring effortless operation.

MORE QUALITY LESS SERVICE

Engineered with built-in quality, the system runs so reliably you’ll nearly forget about service or maintenance.

 

STANDARDS

  • Strong frame design to minimise deflection during cutting
  • User-Friendly Touchscreen controller avoiding operator misuse.
  • Automatic blade gap setting, cut length, backgauge stroke and counter
  • Ball transfers on table for smooth handling of the sheets.
  • Enlarged backgauge stroke to 1000 mm
  • Side squaring arm with ruler lengths up to 1500mm
  • Front support arms 1000 mm with slot and flip-stops
  • Flip-up finger guard of 1000 mm at cutting area.
  • Sheet slider at rear for easy falling of sheets
  • Rubber pads underneath holddown pistons to avoid scratching of materials
  • Led illumination at cutting area
  • Swivelling pendant arm for the controller moving with the operator.

BLADEX :

Cut steel from 0.5 to 16 mm thickness and – meter lengths with confidence—powered by the finest hydraulic and electrical components, all in a strong, durable assembly.

RAKEX :

Angle Rake (Guillotine) Shears cut with a straight vertical motion and allow adjustable cutting angles, offering higher accuracy, efficiency, and versatility for different material thicknesses

  • Motor-driven back gauge with two speeds A.C. motor and recirculation ball screws and linear rod guides.
  • Electronic programmer with microprocessors Touchscreen Cybelec Cybtouch 8G for automatic control of:
    1. cutting angle
    2. blade gap
    3. Hold down pressure
    4. cutting length
    5. programming of back gauge
    6. stroke counter

 

  • Motorised blade distance adjustment with dimensional mechanical control.
  • Spherical balls in table for easy sheet movement (Transfer balls)
  • Stainless steel table tops
  • Sheet slider at rear
  • Side squaring arm 1500mm
  • Standard extension arms 1000mm
  • Cutting light & wire
  • Induction hardened and ground Blades for mixed cutting
  • Control foot pedal
  • Instruction and maintenance manual
  • Machine according to standard 2006/42/CE and CE certificate
  • The upper blade moves almost parallel to the lower blade, slicing through metal in a guillotine-like motion.
  • Adjustable by the operator to suit different materials and thicknesses, offering more fl exibility and better cut quality.
  • Clean, right-angled cuts with minimal burrs.
  • Blades stay sharp longer since they don’t rub against each other.
  • Easier blade clearance adjustment, shorter setup times.
  • Strong, rigid design ensures stability.

ANGLE RAKE SHEAR TECHNICAL DATA

RAKEX  RAKEX 3006 RAKEX 3010 RAKEX 3013 RAKEX 3016 RAKEX 3020
Capacity (length x cutting capacity ) 3060X6 3060X10 3060X13 306016 3060X20
Cutting performance for material tensile strength 400 N/mm² 6 10 13 16 20
Cutting performance for material tensile strength 600 N/mm² 4 8 10 13 16
Rear stop speed 150 150 150 150 150
Cutting angle (min/max) 0,5 °- 2° 1 °- 2,5° 1 °- 2,5° 1 °- 2,5° 1 °- 2,5°
Max. strokes for full cutting length (min/max) 20-25 15-24 14-20 13-24 10_22
Number of hold-down units 18 13 13 12 12
Oil tank capacity 310 280 280 580 650
Dimensions and weights
Table length 3580 3600 3640 3680 3700
Table depth 540 670 700 720 700
Table height 860 900 900 900 950
Machine body depth 1710 2200 2300 2850 2600
Length approx. 3900 4200 4200 4180 3800
Width/depth approx.(with Back Fence and Front arms) 3900 4150 4250 4800 4550
Height approx. 2100 2300 2350 2800 2800
Weight approx. 10000 13550 16200 19550 27050
Electric Data
Drive motor output 11 22 30 37 45
Backgauge Stroke 1000 1000 1000 1000 1000

BLADEX Swing Beam Data

2006 2010 2013 2506 2510 2513 3006 3010 3013 3016 4006 4013
Capacity (length x cutting capacity ) 2060 2060 2060 2560 2560 2560 3060 3060 3060 3060 4060 4060
Cutting performance for material tensile strength 400 N/mm² 6 10 13 6 10 13 6 10 13 16 6 13
Cutting performance for material tensile strength 600 N/mm² 4 6 8 4 6 8 4 6 8 10 4 8
Rear stop speed 120 120 120 120 120 120 120 120 120 120 120 120
Cutting angle (min/max) 1,5° 1,5° 1,8° 1,5° 1,5° 1,8° 1,5° 1,5° 1,8° 2° 1,2° 1,8°
Max. strokes for full cutting length (min/max) 24 14 14 22 14 14 20 12 12 10 12 8
Number of hold-down units 12 12 12 15 14 14 17 16 16 16 21 21
Oil tank capacity 180 250 320 180 260 320 180 260 320 440 180 320
Dimensions and weights
Table length 2320 2410 2540 2820 2910 3010 3320 3410 3510 3580 4330 4510
Table depth 485 590 590 485 590 590 485 590 590 605 485 590
Table height 800 900 900 900 800 900 900 900 900 900 850 900
Machine body depth 1535 1985 1985 1535 1985 1985 1535 1985 1985 220 1635 1985
Length approx. 2900 3030 3140 3530 3520 3640 3900 4030 4140 4220 4950 5140
Width/depth approx.(with Back Fence and Front arms) 3275 3300 3300 3275 3300 3300 3275 3300 3300 3480 3120 3300
Height approx. 1900 2130 2175 1900 2130 2175 1900 2130 2175 2220 1900 2325
Weight approx. 5100 7300 12000 5450 9300 13000 6550 10300 14200 16500 9510 17100
Electric Data
Drive motor output 11 22 30 11 22 30 11 22 30 37 11 30

Related products

Category